DT-50-3 (TONE-1) device for the treatment of diadynamic currents.Are available
Product Code: ДТ-50-3
It is a source of continuous pulsed current sine wave (frequency of 50 Hz and 100) and various parcels of the current differing in duration, number and frequency of pulses form rise and decay of the amplitude (of 9 species).
Driving apparatus ensures the independence of its current patient resistance. The unit is equipped with automatic shut-off of the patient with a sharp increase in current during the procedure, as well as the gradual reduction of current supply at the end of the procedure.
The device is equipped with a set of working electrode, two electrode holders and other accessories.
Power - AC power 50 Hz
Voltage - 220 V,
Power Consumption - 60 VA
Protection - 2
The number of types of dynamic current - 9
Operation mode setup time - no more than 5 minutes.
The maximum value of the average current - 50 mA
under a load of 500 ohms,
25 with a load of 4 ohms,
10 6 ohm load,
Overall dimensions - 418 x 154 x 283 mm,
Weight of the machine without the set - 9 kg.
COMPLETE: The unit with the power cord and patient cable (one-piece), ugletkanevye electrodes: 150 x 200 mm, 2 pieces, 120 x 170 mm, 2 pieces, 100 x 150 mm 2 pcs, 80 x 100 mm, 2 pcs, 60 x 200 mm, 2 pcs 60 x 100 mm, 2 pcs; ugletkanevy current lead with plug, cable length 15 cm - 4 pcs., current-ugletkanevy without connector, cable length 15 cm - 4 pcs., belts with buckles 2 pcs., the fuse 2 pc., passport